Filters

List of power tool Tenders

List of latest power tool Tenders in Indian Tenders. Click on any power tool Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for power tool Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36297972 | 24 Jan, 2026

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of 1. magnetic core drilling machine as per 1. magnetic core drilling machine as per specification stated below. power source:- corded electric; maximum rotational speed: 450 rpm: voltage: 220-240 volt ac; power input w: 1050 ; core cutting capacitymm: 12 to 38; core cutting depthmm: 50 ; rated speed rpm: 450; weight:11 kg ; direct arbor: 19mm weldon; make: eibenstock positron model -kbm 38 or similar, qty 1 no./set . 2. tungsten carbide tip tct hss annular core drill biit for magnetic drilling machine; cutting depth: 55mm; drill diameter: 20mm; material: tungsten carbide tip tct hss ; shank type: weldon 19mm 3/4; tool flute type : spiral ; make: bds maschinen model : hkl 020 x 55 or similar. qty 02 nos/set. 3. tungsten carbide tip tct hss annular core drill bit for magnetic drilling machine; cutting depth: 55mm; drill diameter: 18mm; material: tungsten carbide tip tct hss ; shank type: weldon 19mm 3/4; tool flute type : spiral ; make: bds maschinen model : hkl 018 x 55 or similar. qty 02 nos/set..

Central Government/Public Sector

TRN :36300698 | 19 Jan, 2026

Tender Value : 0

Panaji - Goa

Tender for gem bids for audio, surface-mount speaker designed for commercial audioapplications, class d amplifier equipped with 1 stereo 2mono line inputs, audio mixer 16 mic input with 48 vphantom power, audio mixer 24 mic input with 48vphantom power and hpf per channel, duet uhf wirelessconference microphone system with 200 selectablechannels, audio interface, speaker cable 14awg, xlrcable, electrical work, installation, configuration, programming testing and commissioning, punching tools, rj 52 2box, lan tester, crimping tools, wirelesskeyboard mouse, connector hub 4port, hdmi extender, 3.5mm to rca jack, extention board, rechargeblebatteries with charger 2500ah, aaa batteries 900 mah, cable manager, card reader, portable speaker 3 set, soldering machine with accessories, 4k ultra hd, 20x zoomhandycam, vc camera with setup, fuses 8 amp, 5 amp, fuse wire 1 roll, battery rack, cable tie, dvi cable, 5v1a power adapter, 5v 2a power adapter, hdmi splitter 2 in8 out, usb cable extender for vc 10 mtrs, lan cable roll35 mtrs, hdmi cable 20 mtr, hdmi cable 10 mtr, hdmicable 05 mtr, hdmi cable 02 mtr, xlr pm10 male, 6.35mm aux connector male, 6.35mm aux connectorfemale, 3.5 mm aux connector female, hdmi switches404, pin connector, c-type to hdmi convertor, 128 gbmemory card for video recording, dam flooring for stage, 14 awg speaker, installation of 14 awg speaker cable, 4core overhead optical fiber cable

Central Government/Public Sector

TRN :36301687 | 21 Jan, 2026

Tender Value : 20.00 Lacs

Darjeeling - West Bengal

Tender for gem bids for machatronics, cnc lathe machine, 3 d printer with scanner, lasercutting machine, tig welding machine, universal testingmachine, coordinate measuring machine, workbencheswith vices, power tools, battery test system, lithium ioncell grading machine, laminar flow station, ate, signalgenerator, spectrum analyzer, soldering desolderingstation, multimeter and lcr meter, pcb etching andrework station, portable laser engraver, pc with ups forcnc lathe machine laser cutter utm cmm cell gradingsystem ate and signal generator, desktop based cadcam software, hardware for cad cam software, 3d printerlarge format, environment control and cooling unit, display unit, 15 kva ups battery bank, 3d printing kitsand raw material, cnc lathe raw materials, earthing andelectrical work, accessories for r and d facility

State Government

TRN :36282902 | 16 Jan, 2026

Tender Value : 10.02 Lacs

Palanpur - Gujarat

Tender for gem bids for power system analysis and design , the constitutional law of india , electric and hybrid vechicles- design fundamentals , modern electric, hybrid electric and fuel cell vehicles- fundamentals, theory and design , a course in electrical engineering materials , subsynchronous resonance in power systems , electric vehicle technology explained , basic electrical engineering , indian constitutional law , introduction to the constitution of india , power system analysis , matrix analysis of electrical machines , special electrical machines , engineering economics analysis , material science for electrical electronics engineers , business ethics and corporate governance , electrical power systems- analysis, security and deregulation , wind power technology , electrical engineering materials , an introduction to electrical engineering materials , hybrid electric vehicles energy management strategies , digital instrumentation , networks and systems , engineering circuit analysis , the art of electronics , computer networking and the internet , software engineering - a precise approach , 8086 programming and advance processor architecture , a first course in probability , advanced java , advanced microprocessors , an introduction to automata theory and formal languages , an introduction to data structures with applications , an introduction to database systems , an introduction to probability theory and its applications , android application development with kitkat support black book , android wireless application development , antihacker tool kit , applied data science with python and jupyter , artificial intelligence , artificial intelligence- a modern approach , beginning android 4 application development , beginning hibernate , beginning jsp, jsf and tomcat web development from novice to professional , c programming language , cloud computing- principles and paradigms , compiler design , complete reference j2ee , computation- finite and infinite , computer graphics , computer networking- a top-down approach , computer networks , computer networks- a top-down approach , computer organization and embedded systems , computer programming , computer system organization , core java volume -i , core java, volume ii- advanced features , cryptography and network security , cyber security and cyber laws , cyber security and laws - an introduction , cyber security understanding cyber crimes, computer forensics and legal perspectives , data communications and networking , data mining concepts and techniques , data science from scratch- first principles with python , data structures using c and cplus plus , design and analysis of algorithms , devops tools from practitioners viewpoint , digital principles and applications , discrete mathematical structures with applications to computer science , distributed operating systemsconcepts and design , distributed systems- principles and paradigms , foundations of algorithms , fundamental of algorithms , fundamental of computer algorithms , fundamentals of algorithms , fundamentals of computer algorithms , fundamentals of computing and programming in c , fundamentals of data structures in c , fundamentals of database systems , fundamentals of software engineering , how to solve it by computer , html 5 black book- covers css3, javasvript, xml, xhtml, ajax, php and jquery , internet and world wide web how to program , internet of things with arduino , intro to java programming , introducing data science- big data, machine learning, and more, using python tools , introduction to algorithms, , introduction to computer theory , introduction to computing systems , introduction to data mining , introduction to design and analysis of algorithms , introduction to information retrieval , introduction to languages and the theory of computation , introduction to the theory of computation , java persistence with hibernate , java server faces in action , java server programming black book j2ee , jsf 2.0 cook book , learning php mysql and javascript with j query css and html5 , learning php, mysql and javascript- a step-by-step guide to creating dynamic websites , let us c , machine learning with python for everyone , microprocessor and interfacing , microprocessors and interfacing, , modern digital electronics , modern operating systems , object oriented programming with java , operating systems- internals and design principles , pandas for everyone-python data analysis , php - the complete reference , principles of database and knowledge - base systems , professional java server programming j2ee , programming in c , programming with c , python for data science for dummies , schaums outline of discrete mathematics , software engineering , software engineeringa practitioners approach , software engineering fundamentals , spring in action , sql, pl sql - the programming language of oracle , structured computer organization , system programming , system programming and compiler construction , tcpand ip protocol suite , the 8088 and 8086 microprocessors , understanding big data , understanding sql , visual story telling with d3 , web design principles , wireless and mobile networks, concepts and protocols, , wireless communications and networks , nanoscale science and technology , surface engineering hand book , turbines, compressors and fans ,fundamentals of compressible flow with aircraft and rocket propulsion , steam and gas turbines and power plant engineering , statistical quality control , engineering thermodynamics , pneumatic systems- principles and maintenance , organizational behavior , manufacturing technology- foundry, farming and welding volume1 , manufacturing technology vol , elements of probability and statistics , physics vol 1 , physics vol 2 , structural analysis , foundation design manual , design aids in soil mechanics and foundation engineering , an introduction to soil reinforcement and geosynthetics , text book of engineering geology , engineering geology for civil engineers , engineering geology , illustrated design of reinforced concrete buildings , advanced structural analysis , principles of geotechnical engineering , basic and applied soil mechanics , design of bridge structures , theory of structures , civil engineering construction materials , advanced reinforced concrete design , design of reinforced concrete foundations , numerical methods in geotechnical engineering , plain and reinforced concrete - code of practice is 456 - 2000 , estimating and costing , estimating, costing, specification and valuation , railway engineering , principles and practice of bridge engineering , tunnel engineering , essential of bridge engineering , basic civil engineering , basic civil engineering , fluid mechanics , advanced surveying , geomatics engineering , highway materials and pavement , fundamentals of town planning , building construction , air pollution control engineering , elements of land soil pollution , harbour, dock and tunnel engineering , environmental science , engineering economics estimation and costing civil , railway and airport engineering civil , transportation engineering civil , environmental engineering civil , building and town planning , contracts management , professional practice and valuation , complex variables and partial differential equations , geotechnical engineering , spoowftercsoymstpeumtianngaltyescishanniqdudeessign | cengage | j. duncan glover, , the constitutional law of india | central law agency | dr. j.n.pandey, electric and hybrid vechicles: | crc press | iqbal hussein, modern electric, hyb. ele and fuel cell vehicles:| crc press | m. ehsani, a course in electrical engineering materials | dhanpat rai | seth and gupta, subsynchronous resonance in power systems | ieee press | p. m. anderson, electric vehicle technology explained | john wiley | larminie and j. lowry, basic electrical engineering | khanna publishers | ritu sahdev, a course in electrical engineering materials | laxmi publications | r k rajput, indian constitutional law | lexisnexis | m.p. jain , introduction to the constitution of india | lexisnexis | durga das basu , power system analysis | tata macgraw hill | hadi saadat, matrix analysis of electrical machines | new age international | mukhopadhyay, a course in electrical engineering materials | new age science | t k basak, special electrical machines | orient. blck | venkataratnam, engineering economics analysis | oxford university | donald, ted , jerome , material science for electrical & electronics engineers: | oxford | hones, business ethics and corporate governance | pearson | a. c. fernando, electrical power systems: analysis, security and deregulation | phi | venkatesh, wind power technology | phi publication | earnest joshua, electrical engineering materials | phi publication | a.j. dekker, an introduction to electrical engineering materials | s. chand | indulkar, , hybrid electric vehicles: energy management strategies | springer | s. onori,, digital instrumentation | tata macgraw hill | a.j. bouwens, networks and systems | new age international | d. roy choudhury, engineering circuit analysis | mcgraw hill education | hayt and kemmerly, the art of electronics | cambridge university press | p. horowitz and w.hill,, computer networking and the internet | pearson education india | fred halsall, software engineering a precise approach | john wiley | pankaj jalote, 8086 programming and advance processor architecture | wiley | m. t. savaliya, a first course in probability | pearson education india | sheldon ross, advanced java, | dream tech publishers | m. t. savaliya, advanced microprocessors | mcgraw hill | daniel tabak, an introduction to automata theory and formal languages | s k kataria | pandey, an introduction to data structures with applications | mcgraw hill | tremblay , an introduction to database systems | pearson education india | kannan, , an introduction to probability theory and its app| john wiley | willliam , android application development | dreamtech press | pradeep kothari, android wireless application development | pearson | conder, darcey, anti-hacker tool kit | mcgraw hill education | mike shema, applied data science with python and jupyter | packt | alex , artificial intelligence | mcgraw hill | elaine rich and kevin knight, artificial intelligence: a modern approach | pearson | russel, peter, beginning android 4 application development | wiley | j. f. dimarzio, beginning hibernate | apress | jeff linwood and dave minter, beginning jsp , jsf and tomcat web development: | apress | giulio, c programming language | prentice hal | kernighan b w and ritchie d m, cloud computing: principles and paradigms | wiley | rajkumar buyya, , compiler design | pearson education india | alfred v aho, complete reference j2ee | mcgraw hill | james keogh, computation: finite and infinite | phi | marvin l. minsky, computer graphics | pearson education india | d.hearn and p.baker, computer graphics | pearson | john f hughes, computer graphics | mcgraw hill | amrendra sinha , arun udai, computer networking- a top-down approach | pearson | james kurose and keith ross, computer networks | pearson education india | andrew tanenbaum, computer networks- a topdown approach | mcgraw hill | behrouz a. , computer organization and embedded systems | mcgraw-hill education | hamacher, , computer programming | pearson education | ashok n. kamthane, computer system organization | mcgraw-hill education | n. d. jotwani, core java volume -i | pearson education india | cay horstmann, core java, volume ii: advanced features | pearson | cay horstmann and cornell, cryptography and network security | tata mcgraw hill | atul kahate, cyber security and cyber laws | cengage publication | alfred basta ravinder, cyber security and laws an introduction | staredu solutions | madhumita, cyber security unders cyber crimes, comp fore & legal persp | wiley | nina , data communications and networking | mcgraw hill | behrouz a. forouzan, data mining concepts and techniques | elsevier | j. han, m. kamber, data science from scratch: | shroff/o'reilly | joel grus , data structures using c & c++ | phi | yedidyah langsam ,moshe and tenenbaum, design and analysis of algorithms | pearson | parag himanshu dave,, devops tools from practitioners viewpoint | john wiley | deepak gaikwad,, digital principles and applications | mcgraw-hill education | malvino & leach, discrete mathematical structures with app to comp sci | mcgraw-hill | tremblay

Central Government/Public Sector

TRN :36286567 | 23 Jan, 2026

Tender Value : 84.4 Thousand

New Delhi - Delhi

Tender for gem bids for pusa tool kit for nursery preparation , pusa tool kit for vegetable cultivation , pusa tool kit for fruit trees management , pusa tool kit for potato cultivation , pre germinated paddy seeder , power winnower , wheel hand hoe , manual paddy thresher , pusa safe manual chaff cutter with safety gadgets , safety gadgets for chaff cutter

Central Government/Public Sector

TRN :36267769 | 13 Jan, 2026

Tender Value : 13.95 Crore

Chennai - Tamil Nadu

Tender for gem bids for custom bid for services - custom bid for services- schedule 1labour cost of mechanized cleaning of coaches at gsn tbm depots including gst at 18 percentage , custom bid for services - custom bid for services schedule 2 cost of consumables, tools, machineries and uniforms of mechanized cleaning of coaches at gsn tbm depots inclusive of gst at 18 percentage , custom bid for services - custom bid for services- schedule 3 labour cost of intensive mechanized cleaning of coaches fortnight at gsn tbm depots including gst at 18 percentage , custom bid for services - custom bid for services schedule 4 cost of consumables, tools, machineries and uniforms of intensive mechanized cleaning of coaches fortnight at gsn tbm depots including gst at 18 percentage , custom bid for services - custom bid for services- schedule 5 cost of provision of toiletries in non obhs trains of gsn tbm depots inclusive of gst at 18 percentage , custom bid for services - custom bid for services schedule 6 service charges at 3 point 85 percent on man power cost excluding epf,esi,bonus,pmsby and pmjjby inclusive of gst at 18 percentage , custom bid for services - custom bid for services-schedule 7 cost of pf,esi,bonus,pmsby and pmjjby of labours engaged in mechanized cleaning and intensive mechanized cleaning of coaches at gsn tbm depots inclusive of gst at 18 percentage

Central Government/Public Sector

TRN :36271745 | 23 Jan, 2026

Tender Value : 0

Hoshiarpur - Punjab

Tender for gem bids for entry and mid level desktop computer q2, multifunctionmachine mfm v2 q2 * * 2 32 3 / mserelaxation for years of experienceyes | partial | experience - 2 year s * * & % & % 2 32 3 / startuprelaxation for years of experienceyes | partial | experience - 1 year s 4 4 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificatein case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer6 6 8 8 9 9 : : & 8 & 8 ; ; 8 8 : : ? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & a a b b / minimum number ofbids required to disable automatic bidextension1: 8: 8 b b, , e e -- / / number of days for which bidwould be auto--extended3 b /bid number: gem/2026/b/7063637: /dated: 02-01-2026 & & / bid document1 / 12 6 ; 6 ; : : : : / /number of auto extension count1 n %n % :4 :4 : : /bid to ra enabledno 2 2 /type of bidtwo packet bid2 2 q q /primary product categoryentry and mid level desktop computer r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u a a v v u u 2 2 / % % ; 8 ; 8 9 9 /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail a /requiredno /epbg detail a /requiredno : / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes : 4 ; 2, : r l1+x% ; / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 : ; 2 2 / maximum percentage of bidquantity for mii purchase preference502 / 12 % - - : 2 2017 6 1/6 2 & % % : 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeyes, in compliance with the mii order : dpiit orderasamended and applicable time to time /mse purchase preference /mse purchase preferenceyes ` c % ;2, : r l1+x% ; /purchase preference to mse oems available uptoprice within l1+x%15 ` c ; 2 2 / maximumpercentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall berelaxed from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking relaxation from experience criteria, shall upload the supportingdocuments to prove his eligibility for relaxation.2. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking relaxation from experience criteria, shall upload the supporting documents to prove his eligibility forrelaxation. 3. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 4. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decide3 / 12 eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. entry and mid level desktop computer 30 pieces 4 4 1 2 & & % % % % d d ; ; % % 2 32 3 a a /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname a a r r /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or higheroperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higherstoragetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highermonitoravailibility of monitoryes as per is 13252 part 1screen size in cms53.1 - 58 20.91 - 22.83warrantyon site oem warranty inyear5 or higheradditional specification parameters - entry and mid level desktop computer 30 pieces 4 / 12 specification parameternamebid requirement allowed values1 chipset number 2 processornumber 3 storage 1 4storage2 5 monitor1 intel q670 or higher 2 -intel core i5 12500 or higher 3-minimum 256gb ssd or higher 4-minimum 1 tb sata hdd/ssd hard disk 5-led backlitmonitor 21.5 inches or higher* bidders offering must also comply with the additional specification parameters mentioned above. //n : f n : f /consignees/reporting officer and quantity4. .4. ./s.no. //n : f n : f /consigneereporting/officer /address /quantity: : : : /deliverydays1aashish vashisht146001, punjab & sind bank, zonal office hoshiarpur, sco-23, schno.11, sant harchandsingh longowal nagar, chandigarh road, nearmini secretariat.hoshiarpur-1460013015multifunction machine mfm v2 10 pieces 4 4 1 2 & & % % % % d d ; ; % % 2 32 3 a a /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname a a r r /bid requirementallowed valuesgenericdescription of storesmultifunction machine printer with minimum 1 year onsite warranty, including cartridge and powercord/adapterprint technologylasertype of printingmonochrome black, colour or higherprintingprint paper sizea4 and legalminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to120, 121 to 140, 141 to 160, 161 to 180 or higherminimum print speed perminute as per iso/iec 24734in a4 size-colour in ppmnot applicable, 1 to 5, 6 to 10, 11 to 15, 16 to 20, 21to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to 180 or higher5 / 12 minimum speed per minuteas per iso/iec 24734 in a3size-mono in ppmnot applicable or higherminimum speed per minuteas per iso/iec 24734 in a3size-color in ppmnot applicable or higherauto duplexingprinting/coping 2-sidedfeatureyes or higherpaper handlingoriginal document feedertype for scanning andcopyingsingle-pass document feeders spdf or highernumber of main paper tray1connectivityconnectivityusb port, ethernet port, wi-fi /speci cation t t /specificationname a a r r /bid requirementallowed valuesadditional specification parameters - multifunction machine mfm v2 10 pieces specification parameternamebid requirement allowed values1 ram size 2 cartridgetechnology 3 auto duplexprinting and scanning withfacsimile 4 on site warranty1 1 gb or more 2 composite cartridge 3 yes 4 3 years* bidders offering must also comply with the additional specification parameters mentioned above. //n : f n : f /consignees/reporting officer and quantity4. .4. ./s.no. //n : f n : f /consigneereporting/officer /address /quantity: : : : /deliverydays1aashish vashisht146001, punjab & sind bank, zonal office hoshiarpur, sco-23, schno.11, sant harchandsingh longowal nagar, chandigarh road, nearmini secretariat.hoshiarpur-1460011015special terms and conditions-version:6 effective from 28-07-2025 for category entry and mid leveldesktop computer1. for buyers:6 / 12 the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop system should be adevice partner of microsoft or hold a valid authorisation from microsoft.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that the authorisation from microsoft shall not be made amandatory requirement in bids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.4processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20247 / 12 scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.9check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.8 / 12 hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee in itsoriginal, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warrantyterms. the warranty certificate should be verifiable through the oemwebsite/customer care centre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirementsas per the government of india notifications issued from time to time for hardwareand software components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems7scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, ausb type-a 3.2 gen 2 port may be acceptable in place of usb type a portversion 3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:4 effective from 31-01-2025 for category multifunctionmachine mfm v21. for buyers9 / 12 productverificationthe buyer/consignee shall verify the complete product details, includingconfiguration, through the oem website. the buyer/consignee should be able toperform these verifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcentre to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the multifunctionmachine printer at the time of delivery to ensure that the product has not beenin use prior to delivery to the buyer and may be verified using themultifunction printer s built-in print counter or an equivalent tracking system asavailable with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers3oem websitelink/part nofor productverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. adevice serial number must also be provided at the time of supply, which must also bementioned on the product supplied. the buyer/consignee must be able to verify thecomplete product details, including configuration, through the provided oem websitelink. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digitalformat from the oem to the purchaser, guaranteeing the products coverageunder the specified warranty terms. the warranty certificate should beverifiable through the oem website/customer care centre.2. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within thewarranty period, whichever is earlier, i.e. once the printer meets either theminimum number of prints within the warranty period or the time durationspecified, the warranty coverage will end.3. the actual number of prints completed by the printer during the warrantyperiod may be verified using the printer s built-in print counter or an equivalenttracking system.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogueparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.4 4 9 9 h h/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericexperience criteria: the bidder or its oem themselves or through resellers should have regularly, 10 / 12 manufactured and supplied same or

Central Government/Public Sector

TRN :36253882 | 23 Jan, 2026

Tender Value : 23.33 Lacs

Bhopal - Madhya Pradesh

Tender for gem bids for pcb milling machine , reflow oven for smd soldering , pcb power drilling machine , digital microscope , digital led tester machine , transistor test rig , simulation test rig for electronic device , electronic design automation tester , cmos based switching circuit tester , demonstration of gates , wall mounted light or lamp with uv c disinfection , sterilisinglamp , esd safe antistatic combo , articulated robot six axis , mycobot 280 pi , dlp-3d printer kit and tools , resin for 3d printer , laser cutter , desktop milling machine

Related Searched Keywords : power tool

List of power tool Tenders

Get power tool Tender Alert...

Related Searched Keywords : power tool

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us